Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
The suspension shall apply to fish intended to undergo any operation unless they are intended to undergo exclusively one or more of the following operations:
cleaning, gutting, tailing, heading,
cutting (excluding filleting or cutting of frozen blocks),
sampling, sorting,
labelling,
packing,
chilling,
freezing,
deep freezing,
thawing, separation.
The suspension is not allowed for products intended, in addition, to undergo treatment (or operations) qualifying for suspension where such treatment (or operations) is (are) carried out at retail or catering level. The suspension of customs duties shall apply only to fish intended for human consumption.
However, the suspension is not allowed where processing is carried out by retail or catering undertakings.
Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:
industrial monocarboxylic fatty acids of subheading
mixtures of methyl esters of fatty acids of subheading
methyl esters of fatty acids of heading
stearic acid of subheading
or
goods of heading No
Crude light oils containing by weight:
10 % or more of vinyltoluenes,
10 % or more of indene
and
1 % or more but not more than 5 % of naphthalene
Dichromium trioxide:
of a specific surface of 37 m
of a purity by weight of 99,5 % or more calculated on the dry substance,
of a specific gravity of 1,2 g/cm
for the manufacture of magnetic chromium dioxide
Zinc sulfide containing:
20,0 mg/kg or less of chloride,
0,2 mg/kg or less of copper,
0,5 mg/kg or less of iron
and
1,0 mg/kg or less of lead
Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:
2 mg/kg or more of arsenic,
200 mg/kg or more of calcium,
200 mg/kg or more of chlorides,
20 mg/kg or more of iron,
150 mg/kg or more of magnesium,
20 mg/kg or more of heavy metals,
300 mg/kg or more of potassium,
300 mg/kg or more of sodium,
200 mg/kg or more of sulfates,
determined according to the methods specified in the European Pharmacop_zia
2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:
0,001 mg/kg or less of tetrachlorodibenzodioxines,
0,001 mg/kg or less of tetrachlorodibenzofurans,
0,2 mg/kg or less of tetrachlorobiphenyls
Tetramethylammonium hydroxide, in the form of an aqueous solution containing:
(25 ± 0,5) % by weight of tetramethylammonium hydroxide,
500 mg/kg or less of carbonate,
200 mg/kg or less of chloride
and
5 mg/kg or less of potassium
Reaction product consisting of the methyl esters of (±)-6-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-
Solution containing:
(30 ± 5) % by weight of polyamide resin,
(6,5 ± 3,5) % by weight of diazonaphthoquinone,
(55 ± 5) % by weight of 1-methyl-2-pyrrolidone,
and
Solution containing by weight:
(65 ± 10) % of ã-butyrolactone,
(30 ± 10) % of polyamide resin,
(3,5 ± 1,5) % of naphthoquinone ester derivative
and
(1,5 ± 0,5) % of arylsilicic acid
Solution based on chemically modified natural polymers, containing two or more of the following dyes:
methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1
methyl 6-(isobutyryloxy)-2,2-diphenyl-2
13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[
ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2
13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[
Solution based on chemically modified natural polymers, containing two or more of the following dyes:
4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[
4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[
cyclohexyl 8-methyl-2,2-diphenyl-2
ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2
2-pentyl-7,7-diphenyl-7,8-benzochromeno[6,5-
13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo[
3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[
6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[
Non-aqueous surface-active preparation, containing:
polyethylene glycol alkylphenyl ether,
2,4,7,9-tetramethyldec-5-yne-4,7-diol
and
phosphoric acid esters
Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride (
3,5 % or more of available chlorine, measured iodometrically
and
17,0 % or more of phosphorus evaluated as P
Preparation containing by weight:
58 % or more but not more than 62 % of 1-bromo-3-chloro-5,5-dimethylhydantoin,
26 % or more but not more than 29 % of 1,3-dichloro-5,5-dimethylhydantoin,
10 % or more but not more than 12 % of 1,3-dichloro-5-ethyl-5-methylhydantoin,
for the manufacture of swimming-pool disinfectants
Catalyst consisting of palladium and rhenium, fixed on a support of active carbon, in the form of powder, containing:
0,5 % or more but not more than 1,5 % by weight of palladium,
3 % or more but not more than 5 % by weight of rhenium
and
0,1 mole % or more but not more than 1 mole % of alkaline metals,
for use in the manufacture of tetrahydrofuran
Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:
20 % or more but not more than 30 % of titanium
and
55 % or more but not more than 72 % of chlorine
Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis):
15 % or more but not more than 30 % of titanium
and
40 % or more but not more than 72 % of chlorine
Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite):
with a mole-ratio of silicon dioxide: dialuminium trioxide of not less than 500: 1
and
containing by weight 0,2 % or more but not more than 0,8 % of platinum
Mixture of fatty acids containing by weight:
2 % or more but not more than 6 % of hexanoic acid,
53 % or more but not more than 60 % of octanoic acid,
34 % or more but not more than 42 % of decanoic acid
and
not more than 2 % of dodecanoic acid
Grains or granules, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight:
70 % or more but not more than 78 % of dialuminium trioxide
and
19 % or more but not more than 26 % of zirconium dioxide
Preparation in the form:
of powder, containing by weight 75 % or more of zinc bis[3,5-bis(1-phenylethyl)salicylate]
or
of aqueous dispersion, containing by weight 22 % or more but not more than 55 % of zinc bis[3,5-bis(1-phenylethyl)salicylate]
Preparation consisting essentially of alkaline asphalt sulfonate, of:
a specific gravity of 0,9 or more but not exceeding 1,5
and
a solubility in water of 70 % by weight or more
Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulfonic acid, either:
on a support of mineral wax, whether or not modified chemically,
or
in the form of a solution in an organic solvent
Magnetisable iron oxide, in the form of powder, containing by weight:
30 % or more but not more than 38 % of bivalent iron in relation to the total iron
and
1 % or more but not more than 4 % of cobalt
Mixture containing by weight:
7 % or more but not more than 9 % of 2-methyl-1,3-phenylene diisocyanate,
31 % or more but not more than 34 % of 4-methyl-1,3-phenylene diisocyanate,
10 % or more but not more than 13 % of 2,4′-methylenediphenyl diisocyanate,
46 % or more but not more than 49 % of 4,4′-methylenediphenyl diisocyanate
Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:
either an aluminium-alkyl compound,
or an organic complex of tungsten
or an organic complex of molybdenum
Mixed metals oxides, in the form of powder, containing by weight:
either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,
or 30 % or more of lead and 5 % or more of niobium,
for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors
Mixture containing by weight:
60 % or more of 2-[
and
20 % or more of acetic acid
Preparations consisting predominantly of ethylene glycol and:
either diethylene glycol, dodecandioic acid and ammonia water,
or silicon oxide,
or ammonium hydrogen azelate,
or ammonium hydrogen azelate and silicon oxide,
or dodecandioic acid, ammonia water and silicon oxide,
for the manufacture of electrolytic capacitors
Mixed oxides of metals, in the form of powder, containing by weight:
70 % or more but not more than 75 % of iron oxide,
10 % or more but not more than 20 % of zinc oxide,
10 % or more but not more than 15 % of magnesium oxide,
1 % or more but not more than 5 % of manganese oxide
and
1 % or more but not more than 3 % of copper oxide
Mixture of metal oxides, in the form of powder, containing by weight:
20 % or more of barium,
10 % or more of titanium
and
4 % or more of lead or 3 % or more of niobium or 0,7 % or more of zirconium,
for use as dielectric material in the manufacture of multilayer ceramic capacitors
Aluminium sodium silicate, in the form of spheres of a diameter of:
either 1,6 mm or more but not exceeding 3,4 mm,
or 4 mm or more but not exceeding 6 mm
Calcium oxide stabilised zirconia in the form of lumps of which 94 % or more by weight is retained on a 16 mm sieve, containing by weight:
92 % or more of zirconium dioxide
and
2 % or more but not more than 6 % of calcium oxide
Mixture containing:
unsaturated, dimerised fatty acids, hydrogenated and polymerized with ethylenediamine and octadecan-1-ol,
white oil,
2-methylpentane-2,4-diol
and
glycerides of decanoic and octanoic acids
Reaction product, containing by weight:
1 % or more but not more than 40 % of molybdenum oxide,
10 % or more but not more than 50 % of nickel oxide,
30 % or more but not more than 70 % of tungsten oxide
Polypropylene containing no plasticizer and not more than:
7 mg/kg of aluminium,
2 mg/kg of iron,
1 mg/kg of magnesium,
8 mg/kg of chloride
Polypropylene, containing no plasticiser,
of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),
of a heat of fusion of 15 J/g or more but not exceeding 70 J/g,
of an elongation at break of
of a tensile modulus of 69 MPa or more but not exceeding 379 MPa (as determined by the ASTM D 638 method)
Copolymer of styrene with 2-ethylhexyl acrylate or with
10 mole % or more but not more than 16 mole % of acrylate,
0,2 mg/kg or less of sodium
and
0,1 mg/kg or less of calcium
Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:
81,5 % or more but not more than 84,5 % of vinyl chloride,
13,8 % or more but not more than 16,2 % of vinyl acetate
and
0,8 % or more but not more than 1,2 % of maleic acid,
for the manufacture of goods of heading No
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:
87 % or more but not more than 92 % of vinyl chloride,
2 % or more but not more than 9 % of vinyl acetate
and
1 % or more but not more than 8 % of vinyl alcohol,
in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of heading No
Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a molecular weight (M
9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate
and
5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
Polymers of esters of acrylic acid with one or more of the following monomers in the chain:
chloromethyl vinyl ether,
chloroethyl vinyl ether,
chloromethylstyrene,
vinyl chloroacetate,
methacrylic acid,
containing by weight not more than 5 % of each of the monomeric units
Solution containing:
(36 ± 0,5) % by weight of polyamide with lateral ester groups,
(2 ± 0,5) % by weight of acrylic ester,
(48 ± 0,5) % by weight of 1-methyl-2-pyrrolidone,
(12 ± 0,5) % by weight of bis(2-methoxyethyl) ether,
500 µg/kg or less of potassium
and
500 µg/kg or less of iron,
for use in the manufacture of goods of heading No
Cellulose acetate propionate, non-plasticised, in the form of powder:
containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method)
and
of a viscosity not exceeding 120 poise (as determined by the ASTM D 817-72 method),
for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:
a thickness of 55 µm or more but not exceeding 97 µm,
a tensile modulus in the machine direction of 0,75 GPa or more but not exceeding 1,45 GPa
and
a tensile modulus in the transverse direction of 0,20 GPa or more but not exceeding 0,55 GPa
Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 µm, either:
only dyed in the mass, or
dyed in the mass and metallized on one side
Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 µm, which only:
contains a colouring and/or UV-absorbing material throughout the mass
and
is metallised on one side,
whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive
Poly(ethylene terephthalate) film, of a thickness of 18 µm or more but not exceeding 25 µm, having:
a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method)
and
a shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)
Plasticized film of polyvinyl butyral, containing by weight:
either 14,5 % or more but not more than 17,5 % of dihexyl adipate,
or 14,5 % or more but not more than 28,5 % of dibutyl sebacate
Film of poly(ethylene terephthalate), metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following caracteristics:
a visible light transmission of 50 % or more,
coated on both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),
a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account,
for use in the manufacture of heat-reflecting laminated glass
Film of polyimide, not containing epoxyde resin and/or glass fibres,:
metallized by sputtering with copper on one side or on both sides,
metallized by sputtering with copper and plated on one side or on both sides with refined copper
or
covered on one side or on both sides with a copper foil
Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and containing by weight:
2 % or less of unhydrolysed acetate groups evaluated as vinyl acetate
and
5 % or more but not more than 25 % of glycerol as plasticizer,
for the manufacture of roof-windows
Polyethylene film, of a thickness of 16 µm or more but not exceeding 24 µm, having:
a weight of 19 g/m
a water vapour transmission rate of
an elongation in the transverse direction of 25 % or more at a load of 500 g or less,
an elongation in the machine direction of 50 % or more but not exceeding 100 % (as determined by the ASTM D 882-91 method),
for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles
Impregnated paper coated or covered with a pressure-sensitive self-adhesive layer, the whole:
of a tensile of
of a stretch factor of 1,5 % or more but not exceeding 3,0 % in the machine direction (as determined by the EN ISO 1924-2 and ISO 3781 methods)
Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of:
knee-length stockings of subheadings
women's stockings of subheadings
or
panty hose (tights) of subheading
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:
of a thickness of 200 µm or more but not exceeding 280 µm
and
of a weight of 20 g/m
Yarn of continuous ceramic filaments, each filament containing by weight:
12 % or more of diboron trioxide,
26 % or less of silicon dioxide
and
60 % or more of dialuminium trioxide
Glass face-plate:
with a diagonal measurement of 366,4 mm (± 1,5 mm) and of dimensions of 246,4 × 315,4 mm (± 1,5 mm),
with a diagonal measurement of 391 mm (± 1,5 mm) and of dimensions of 261,4 × 326,8 mm (± 1,5 mm),
with a diagonal measurement of 442 mm (± 1,5 mm) and of dimensions of 293,4 × 369,2 mm (± 1,5 mm),
with a diagonal measurement of 544,5 mm (± 1,6 mm) and of dimensions of 358 × 454 mm (± 1,6 mm), having a cylindrical curvature,
with a diagonal measurement of 570,5 mm (± 1,6 mm) and of dimensions of 360 × 486 mm (± 1,6 mm),
with a diagonal measurement of 629,8 mm (± 3 mm) and of dimensions of 406,5 × 519 mm (± 2 mm), having a cylindrical curvature,
or
with a diagonal measurement of 753 mm (± 1,6 mm) and of dimensions of 471 × 640 mm (± 1,6 mm),
and with a raised edge, for the manufacture of colour cathode-ray tubes
Glass face-plate:
with a diagonal measurement of 604,5 mm (± 3 mm) and of dimensions of 340 × 541 mm (± 2 mm),
with a diagonal measurement of 639,3 mm (± 3 mm) and of dimensions of 413,6 × 527 mm (± 2 mm),
with a diagonal measurement of 708 mm (± 3 mm) and of dimensions of 404 × 633 mm (± 2 mm),
with a diagonal measurement of 723 mm (± 3 mm) and of dimensions of 477 × 602 mm (± 2 mm),
or
with a diagonal measurement of 812,8 mm (± 3 mm) and of dimensions of 463,8 × 725,5 mm (± 2 mm),
having a cylindrical curvature, for the manufacture of colour cathode-ray tubes
Cold-rolled steel, coated on both sides with a nickel-zinc layer, in the form of strip of a width of 40,15 (± 0,08) mm and a thickness of 0,3 (± 0,01) mm, containing by weight:
not more than 0,1 % of carbon,
not more than 0,04 % of phosphorus,
not more than 0,05 % of sulfur
and
0,2 % or more but not more than 0,5 % of manganese
Disc (target) with deposition material, consisting of molybdenum silicide:
containing 1 mg/kg or less of sodium
and
mounted on a copper or aluminium support
Disc (target) with deposition material, of tungsten or an alloy containing by weight 90 % of tungsten and 10 % of titanium:
containing 100 µg/kg or less of sodium
and
mounted on a copper or aluminium support
Disc (target) with deposition material, of titanium:
containing 50 µg/kg or less of sodium
and
mounted on a copper or aluminium support
Plate of an alloy of zinc, ground and polished on one surface and coated with an epoxide resin on the other surface, of rectangular or square shape, of a length of 300 mm or more but not exceeding
10 mg/kg or less of iron,
10 mg/kg or less of lead,
700 mg/kg or more but not more than 900 mg/kg of aluminium
and
500 mg/kg or more but not more than 900 mg/kg of magnesium,
for the manufacture of sensitised printing plates
Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections and bearing:
an identification marking consisting of or including (one of) the following combination(s):
LDGU LT 022
or
other identification markings relating to devices complying with the abovementioned description
Electronic assembly for a laser read-head of a compact disc player, comprising:
a printed circuit,
a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,
not more than 3 connectors,
not more than 1 transistor,
not more than 3 variable and 4 fixed resistors,
not more than 5 capacitors,
the whole mounted on a support
Video monitor comprising:
a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen not exceeding 110 mm and equipped with a deflector yoke,
and
a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,
the whole mounted on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus
Ceramic filter package, excluding surface acoustic wave filters, consisting of:
a transmit filter with a centre frequency of
and
a receive filter with a centre frequency of
the whole contained in a housing
Ceramic filter package, excluding surface acoustic wave filters, comprising 2 filters with one of the following combinations of characteristics:
a transmit centre frequency of 902,5 MHz, a receive centre frequency of 947,5 MHz and an insertion loss not exceeding 3,2 dB at a bandwidth of 25 MHz
or
a transmit centre frequency of
the whole contained in a housing
Antenna switch, comprising:
a transmit filter with a centre frequency of 942,5 MHz or more but not exceeding
and
a receive filter with a centre frequency of 847,5 MHz or more but not exceeding
the whole contained in a housing
Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections and bearing:
an identification marking consisting of or including (one of) the following combination(s):
2AV28E 2AV31E 2AV56
or
other identification markings relating to devices complying with the abovementioned description
Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
FA 01314 FA 01317 FA 01321 FMC 1717 FMC 1819 ISO 122 MHW 105 MHW 1815 MHW 2701 MHW 2707 MHW 607 MHW 704 MHW 707 MHW 720 MHW 803 MHW 820-1 MHW 820-2 MHW 9002 MHW 910 MHW 914 MHW 915 MHW 916 MHW 926 MHW 927 MHW 953 PF 0144 PF 0146 PF 0148 PF 0412 PHW 2905 PHW 2907 PHW 5113 PHW 9012 PHW 902 PHW 925 SHW 5115 XHW 105 XHW 2803 XHW 2902 XHW 5115 XHW 903
or
other identification markings relating to devices complying with the abovementioned description
Piezo-electric crystal clock oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
R4000.8 R4000.9
or
other identification markings relating to devices complying with the abovementioned description
Mechanical vibratory gyroscope driven by a 25 or 26 kHz oscillator, comprising a differential amplifier and a detector circuit, contained in a housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
ENC05D
or
other identification markings relating to devices complying with the abovementioned description
Opto-electronic circuit comprising one or more light-emitting diodes (LEDs) and one photodiode with amplifier circuit and an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, contained in a plastic housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
HC PL 2400 HC PL 2730
or
other identification markings relating to devices complying with the abovementioned description
Oscillator, with a centre frequency of 20 GHz or more but not exceeding 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
372-02 372-03
or
other identification markings relating to devices complying with the abovementioned description
Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
RWA010 RWA100 RWA200 RWA300
or
other identification markings relating to devices complying with the abovementioned description
Infrared signal receiver unit, consisting of a photodiode and at least an amplifier in the form of a monolithic integrated circuit, contained in a housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
GP1U58XB SBX 1610
or
other identification markings relating to devices complying with the abovementioned description
Clock/calendar circuit, consisting of a printed circuit on which are mounted at least a quartz oscillator and a monolithic integrated circuit, the whole contained in a housing bearing:
an identification marking consisting of or including (one of) the following combination(s):
DS 1287 DS 12887A DS 1387 MK 48T02 MK 48T08 MK 48T12 MK 48T18 RTC 63421 RTC 65271 RTC 72423
or
other identification markings relating to devices complying with the abovementioned description